Tel. 815-962-5600
Fax 815-962-4600
Mon-Fri 7am-5pm CST
Tel. 815-962-5600
Fax 815-962-4600
Mon-Fri 7am-5pm CST
For verification of HSK tool taper per DIN 69893
Click on image to enlarge
Download PDF: Dial Indicator Tool Taper Gauges (410.210)
Description
Complete set in wooden case consisting of taper plug gauge, taper calibrating rings with dial indicator for diameters d2 and d3 (scale 0.001 mm), and certificate.
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.
Parts
| HSK A/C/E | d2 | HSK B/D/F | d3 | Order Number | ||||
|---|---|---|---|---|---|---|---|---|
| HSK-A 25 | 19 | HSK 32 | 18.15 | 410.210.125.000 | ||||
| HSK-A 32 | 24 | HSK 40 | 23.27 | 410.210.132.000 | ||||
| HSK-A 40 | 30 | HSK 50 | 29.05 | 410.210.140.000 | ||||
| HSK-A 50 | 38 | HSK 63 | 36.90 | 410.210.150.000 | ||||
| HSK-A 63 | 48 | HSK 80 | 46.53 | 410.210.163.000 | ||||
| HSK-A 80 | 60 | HSK 100 | 58.10 | 410.210.180.000 | ||||
| HSK-A 100 | 75 | HSK 125 | 72.60 | 410.210.190.000 | ||||
| HSK-A 125 | 95 | HSK 160 | 91.95 | 410.210.192.000 | ||||
| HSK-A 160 | 120 | - | 116.00 | 410.210.196.000 |
Contact Us About This Item
HSK Dial Indicator Spindle Taper Gauge Manual
Instruction manual for the dial indicator spindle taper gauge (410.310)
Details
PDF (410.310M)
HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed...
Details
PDF (410.230)
Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160
Details
PDF (410.240)
Pneumatic Spindle Taper Gauges
Non-contact measuring with nozzles results in high accuracy and consistency of measuring results. The measuring range can be increased with the built-in dial indicator. This...
Details
PDF (410.320)
Dial Indicator Spindle Taper Gauges
To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should...
Details
PDF (410.310)
Pneumatic HSK Tool Holder Gauge Kits
Gauging kit for HSK tool holder taper with pneumatic measuring column. The Multifunctional Measuring and Control Device is designed for high precision and multifunctional...
Details
PDF (415.310)
Electronic Tool Taper Gauges
The four transducers mounted in the measuring ring are used for differential measurement of gauge dimensions d2 and d3. Deviations from the calibrated taper plug gauge are...
Details
PDF (410.220)
Spindle Runout Test Arbor Instructions
One of the leading causes of tool breakage, part finish issues, tolerance control, and machine registration issues is excessive spindle runout.
Details
PDF (465.005)
Centro Sensors
With the CENTRO, bores and shafts can be easily and precisely centered. The CENTRO is clamped into a tool holder and inserted into the spindle of the milling machine. The...
Details
PDF (570.120)
Print Data Sheet
