Series 968 HSK Tool Holder Taper Gauges

Share |

Click on image to enlarge

Download PDF: Series 968 HSK Tool Holder Taper Gauges (410.211)

Description

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface.

• Calibration on request
• Includes calibrated taper plug gauge and measuring instructions
• Supplied in wooden case with inspection protocol

Parts

Taper	Diameter	Order Number
HSK 25	19	410.211.125.000
HSK 32	24	410.211.132.000
HSK 40	30	410.211.140.000
HSK 50	38	410.211.150.000
HSK 63	48	410.211.163.000
HSK 80	60	410.211.180.000
HSK 100	75	410.211.190.000

Show/Hide Contact Us About This Item

Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown...

Details PDF (410.210)

Tool Holder Taper Check Gauges
Available for 30, 35, 40, 45, 50 taper tool holders

Details PDF (430.120)

Tool Holder Taper Sleeve Gauges
Available for Steep Taper 30, 40, 45, 50, 55, 60, 65

Details PDF (430.110)

Tool Holder Taper Complete Measuring Units
Calibrated with a gauge master, the taper gauge checks large taper diameter, small taper diameter, straightness of the taper, relationship of the flange to the taper, and...

Details PDF (430.140)

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed...

Details PDF (410.230)

Drawbar Stroke Verification Gauges
Prevents gripper failures, spindle and tool holder taper damage, and "stuck" tool holders.

Details PDF (470.110)

Series 978 HSK 30 Degree Clamping Angle Gauges
To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should...

Details PDF (410.231)