TAC Rockford HSK Header
SEARCH  

Tel. 815 962 5600  •  Contact Us  •  Sitemap

Post Product Reviews

Machine Tool Gauges Machine Tool Gauges HSK Taper Products Everything for HSK Tool Holders Tool Holders Machine Accessories Accessories Dimension 3D Printers Rapid Prototyping

Contact Us
Tel. 815 962-5600

Comment This
Share |

Dial Indicator Tool Taper Gauges

For verification of HSK tool taper per DIN 69893

Dial Indicator Tool Taper Gauges Diagram
Click image to enlarge

Complete set in wooden case consisting of taper plug gauge, taper calibrating rings with dial indicator for diameters d2 and d3 (scale 0.001 mm), and certificate.

Function

Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.

HSK A/C/E d2 HSK B/D/F d3 Order Number
HSK-A 25 19 HSK 32 18.15 410.210.125.000
HSK-A 32 24 HSK 40 23.27 410.210.132.000
HSK-A 40 30 HSK 50 29.05 410.210.140.000
HSK-A 50 38 HSK 63 36.90 410.210.150.000
HSK-A 63 48 HSK 80 46.53 410.210.163.000
HSK-A 80 60 HSK 100 58.10 410.210.180.000
HSK-A 100 75 HSK 125 72.60 410.210.190.000
HSK-A 125 95 HSK 160 91.95 410.210.192.000
HSK-A 160 120 - 116.00 410.210.196.000

Data Sheet

PDF data sheet: Dial Indicator Tool Taper Gauges (410.210)

Share |

Related

HSK Dial Indicator Spindle Taper Gauge Manual

HSK Dial Indicator Spindle Taper Gauge Manual
Instruction manual for the dial indicator spindle taper gauge (410.310)
Details PDF

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed...
Details PDF

Tool Holder Drive Key Tool Taper Gauges

Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160
Details PDF

Pneumatic Spindle Taper Gauges

Pneumatic Spindle Taper Gauges
Non-contact measuring with nozzles results in high accuracy and consistency of measuring results. The measuring range can be increased with the built-in dial indicator. This...
Details PDF

Dial Indicator Spindle Taper Gauges

Dial Indicator Spindle Taper Gauges
To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should...
Details PDF

Pneumatic HSK Tool Holder Gauge Kits

Pneumatic HSK Tool Holder Gauge Kits
Gauging kit for HSK tool holder taper with pneumatic measuring column. The Multifunctional Measuring and Control Device is designed for high precision and multifunctional...
Details PDF

Electronic Tool Taper Gauges

Electronic Tool Taper Gauges
The four transducers mounted in the measuring ring are used for differential measurement of gauge dimensions d2 and d3. Deviations from the calibrated taper plug gauge are...
Details PDF

Spindle Runout Test Arbor Instructions

Spindle Runout Test Arbor Instructions
One of the leading causes of tool breakage, part finish issues, tolerance control, and machine registration issues is excessive spindle runout.
Details PDF

Centro Sensors

Centro Sensors
With the CENTRO, bores and shafts can be easily and precisely centered. The CENTRO is clamped into a tool holder and inserted into the spindle of the milling machine. The...
Details PDF