Tool Holder Taper Sleeve Gauges

Click on image to enlarge

Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown...

Details PDF (410.210)

Tool Holder Taper Check Gauges
Available for 30, 35, 40, 45, 50 taper tool holders

Details PDF (430.120)

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed...

Details PDF (410.230)

Drawbar Stroke Verification Gauges
Prevents gripper failures, spindle and tool holder taper damage, and "stuck" tool holders.

Details PDF (470.110)

HSK Clamp Style Benchtop Mounting Fixtures
Clamp style unit for horizontal and vertical use. Includes clamping flange and clamping sleeve. Other configurations and clamping fixtures for standard taper tools are also...

Details PDF (540.210)

Steep Taper Tool Changer Alignment Gauges
Available for Steep Taper 30, 40, 50, and 60

Details PDF (440.800)

Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160

Details PDF (410.240)

Series 968 HSK Tool Holder Taper Gauges
To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should...

Details PDF (410.211)

HSK Tool Changer Alignment Gauges
Available for HSK-A 25, 32, 40, 50, 63, 80, 100, 125, and 160

Details PDF (440.100)