682.698.0003

Kelch HSK-A Collet Chucks for ER/ESX ER-25/32/40 Collets with Internal Thread

DIN 69 682-6

Available for HSK-A 40, 50, 63, 80, 100

PDF Data Sheet: Kelch HSK-A Collet Chucks for ER/ESX ER-25/32/40 Collets with Internal Thread (682.698.0003)

UseFor clamping tools with straight shank according to DIN 6499 type A and B.

DesignPermissible concentricity deviation of hollow taper shank to inner taper 0.003 mm. Chucks are fine balanced without clamping nut according to ISO 1940-1 G 6.3 at 12,000 rpm. Clamping nut balanced to G 6.3 at 18,000 rpm.

Standard SpecificationCollet chuck including clamping nut.

NoteCollet chucks are equipped with internal thread for adjusting screws. Other designs and sizes are available on request.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Kelch HSK-A Collet Chucks for ER/ESX ER-25/32/40 Collets with Internal Thread) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

ForceCheck ID (Inside Diameter) Collet Force Sensors
ForceCheck ID (Inside Diameter) Collet Force Sensors

ForceCheck ID Collet Force Sensors are designed for use with internal gripping collets, chucks, and mandrels. Sensors are customized to the collet; please contact our engineering team with your collet specifications.

HSK-A Synchro Tapping Chucks
HSK-A Synchro Tapping Chucks

Available for HSK-A 63

HSK-A Drill Chucks
HSK-A Drill Chucks

Available for HSK-A 50, 63, 80, 100

Page loaded in 0.1067 seconds.