100.120

Advantages of the HSK Tool Clamping System

PDF Data Sheet: Advantages of the HSK Tool Clamping System (100.120)

• Stiffer and more rigid connection between the tool and spindle

• Higher spindle speeds are possible because the taper is gripped from the inside – higher speeds actually increase clamping forces

• Excellent repeatability and accuracy

• Better surface finish capabilities

• Improved rigidity for long tools – tools rest in clamped position on the flange

• Improved carbide insert life

• Reduced taper height and hollow taper results in lighter tools

• Faster tool change is possible because the tool taper is shorter

• Tool clamping stresses are confined to the front of the spindle

• Cost should not be significantly higher than standard taper


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Advantages of the HSK Tool Clamping System) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

TRIBOS Application Example with SRE-R and SVP
TRIBOS Application Example with SRE-R and SVP

An example TRIBOS application with SRE-R inserts and SVP clamping devices.

GISS 4000 Induction Shrink Fit Systems
GISS 4000 Induction Shrink Fit Systems

Using shrink fit chucks as tool holders offers numerous advantages. Simple handling and above all excellent concentricity, extremely low imbalance as well as extreme clamping force, rigidity, longevity, and short shrink fitting for insertion times are convincing attributes.

HSK-A to HSK-A/C Extensions and Reducing Adapters
HSK-A to HSK-A/C Extensions and Reducing Adapters

For DIN 69 893-1 Form A and C tool holders. Prepared for MAPAL clamping system. Available for HSK-A 50, 63, 80, 100, 125.

GISS 2500 Induction Shrink Fit Systems
GISS 2500 Induction Shrink Fit Systems

Pre-setting, shrink fitting, and measuring, all possible with one system, the GISS 2500 shrink fit system. In addition to tool pre-setting and induction shrink fitting, it is capable of also measuring the shrink fitting tools thanks to an optical measuring unit and intelligent software.

HSK Grippers HK and HKR
HSK Grippers HK and HKR

The BERG Spanntechnik HK and HKR series grippers have significant technical advantages, including integrated force intensification, easy-to-machine spindle contour, and a tribolic coating that does not need lubrication. The HKR gripper adds the unique capability of holding a tool with low force before the tool is clamped. This means that the spindle can pull away from the tool changer before tool clamping takes places (a key feature when fast tool change time is needed).

Capto Clamping Systems
Capto Clamping Systems

BERG Spanntechnik is a leading supplier of Capto grippers and clamping systems.

HSK Implementation
HSK Implementation

Cooperation between machine builder, tool holder manufacturer, and end-user assures process quality.

Manually-Movable Clamping Systems
Manually-Movable Clamping Systems

The manually actuated die clamping system PSP.AM is designed for clamping dies of various widths on on press slides and tables. The selflocking eccentric cam gear guarantees a simple handling with a maximum of reliability.

Page loaded in 0.1133 seconds.