Tool Dynamic Automatic Tool Balancing Systems

The new Tool Dynamic TD 2010 Automatic is a truly universal CNC-based balancing machine with automated correction of the unbalance. The Tool Dynamic TD 2010 Automatic automatically compensates the unbalance in one or two planes by drilling, milling or grinding. The machine can work vertically and horizontally. The balancing machine is controlled by an integrated 19" touch-screen. The numerical control is a Siemens based 840DSL, which can be accessed simultaneously with the balancing software.

Tool Dynamic TD 800 Special Tool Balancing Systems

Based on the proven foundation provides the tool Dynamic Balancing Tool Dynamic TD 800, the balancing of large rotors of all types includes bearing rings, grinding wheels and turbine wheels. With tailor-made clamping adapters, balancing their rotors used quickly and easily.

Tool Dynamic Preset Tool Balancing Systems

Balancing and presetting are key elements of modern manufacturing. It is obviously a good idea to combine these two procedures. The Tool Dynamic Preset is a perfect combination of Haimer's balancing technology. The tool is clamped in the high precision balancing spindle fitted with Haimer's proven adapter system. This saves time and increases accuracy because the tool does not have to be re-clamped.

Tool Holder Taper Inspection Gauge

Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60) The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish. Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose. The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.

HSK-A Heat Shrink Fit Chucks

- Balancing quality G6.3 at 15,000 rpm - MQL suitable - For tool shank tolerance h6 - To DIN 69882-8

HSK-E Collet Holders

Available for HSK-E 25, 32, 40, 50, 63

ForceCheck Hydraulic Tool Holder Force Gauges

Hydraulic tool holders are an excellent ultra-low option with added benefits such as vibration damping and ease of use. One of the major challenges with hydraulic holders is determining if they are still functioning correctly over time. Failure of the hydaulic holding mechanism is often not apparent until cutter slippage occurs, potentially causing damage to both the holder and a scrapped workpiece. ForceCheck hydraulic tool holder force gauges provide a quick and reliable way to verify a tool holder is still operating correctly. The sensor measures the force at the center of the hydraulic sleeve. Using the gauge is as easy as inserting the sensor in the hydraulic holder. Once the actuation piston compresses the hydraulic fluid in the expansion sleeve, the resulting force is shown on a handheld digital display. The measured force can be compared to a new or known-good hydraulic tool holder.

Tool Dynamic TD 1002 Tool Balancing Systems

Balancing Machine to balance tool holders on 1 and 2 planes. - At reasonable price (no PC) - Table and complementary machine - Ideal for mould makers - For small batch lots, single application and standard chucks - Adapter with automatic clamping system

PSK Balancing Masters