Tel. 815-962-5600
Fax 815-962-4600
Mon-Fri 7am-5pm CST
Tel. 815-962-5600
Fax 815-962-4600
Mon-Fri 7am-5pm CST
Measuring HSK spindle drive keys and radius
Click on image to enlarge
Download PDF: Drive Key Spindle Gauges (410.330)
Description
Two measuring gauges in storage case: "go" and "no go" plug gauges.
Note: center deviation of b1 (0.05 mm) is not measured.
When inserted in the spindle, the "go" gauge should be in contact with the plane face. The "no go" gauge should not contact the face.
Parts
| Taper | r1±0.025 | b1±0.05 | e1 | e2 | Order Number | |||
|---|---|---|---|---|---|---|---|---|
| HSK-A 32 | 1.5 | 6.8 | 8.905 | 4.903 | 410.330.132.000 | |||
| HSK-A 40 | 2.0 | 7.8 | 11.081 | 5.903 | 410.330.140.000 | |||
| HSK-A 50 | 2.5 | 10.3 | 13.997 | 7.648 | 410.330.150.000 | |||
| HSK-A 63 | 3.0 | 12.3 | 18.110 | 9.150 | 410.330.163.000 | |||
| HSK-A 80 | 4.0 | 15.8 | 22.073 | 11.898 | 410.330.180.000 | |||
| HSK-A 100 | 5.8 | 19.78 | 27.561 | 14.888 | 410.330.190.000 | |||
| HSK-A 125 | 6.0 | 24.78 | 35.580 | 18.388 | 410.330.192.000 | |||
| HSK-A 160 | 8.0 | 29.78 | 44.538 | 22.888 | 410.330.196.000 |
Contact Us About This Item
Spindle Runout Arbor Carrying Cases
Whether your gauges need to be transported on a frequent basis, or need to be stored in one area for a period of time, we can offer a reliable solution.
Details
PDF (465.006)
Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160
Details
PDF (410.240)
Tool Taper Cleaning Machines
Keep precision at the spindle interface by keeping tool holders clean: The required cleaning unit is simply placed on the drive unit and the taper cleaning device is immediately...
Details
PDF (530.310)
Steep Taper Spindle Plug Gauges
Available for Steep Taper 30, 40, 45, 50, 55, 60, 65
Details
PDF (430.100)
CBN Hydrostatic Grinding Spindle Systems
This is an example of a hydrostatic spindle designed for high speed grinding with CBN grinding wheels. The small bearing diameter in combination with high surface speed allows...
Details
PDF (240.520)
Steep Taper Tool Changer Alignment Gauge Instruction Manual
The tool changer alignment gauge is designed to verify correct alignment of the machine spindle to the tool changer. The gauge consists of three pieces as shown in the diagram....
Details
PDF (440.800M)
Kelch HSK-A Shell End Mill Arbors for Milling Cutters with Longitudinal Slot or Tenon Drive
Available for HSK-A 40, 50, 63, 80, 100
Details
PDF (682.489.0001)
HSK Implementation
Cooperation between machine builder, tool holder manufacturer, and end-user assures process quality.
Details
PDF (100.192)
Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown...
Details
PDF (410.210)
Print Data Sheet
