403.663.ServiceKit-HAAS
HSK-F63 Service Kit for HAAS Machines
Includes all recommended service items for HAAS HSK-A63 machines:
- ForceCheck Pull Force Force Gauge 461.310.663.000 (Complete set with measuring bar, display, and connecting cable)
- Spindle Runout Test Bar 465.663.000.000
- Tool Changer Alignment Tool 440.135.663.000
- HSK-F63 ER32 Collet Holder 681.00419060406
- Balancing Master 468.110.350.000
- Spindle Taper Wiper 530.100.663.000
- Tool Holder Taper Wiper 530.110.150.000
- 3mm T-handle Hex Wrench
- 3mm Hex Socket Bit (3/8" Drive)
- 18mm Wrench
- Metaflux 70-8508 Grease Packet and Brush
- Needle Nose Pliers
- O-Ring Hook
- Includes customized storage cases for convenient storage and transport.
HAAS HSK Troubleshooting Guide
For more information regarding this item (HSK-F63 Service Kit for HAAS Machines) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Indicators and Bases
TAC Rockford offers a variety of magnetic bases and indicators for use with runout test arbors and other gauges. Available as kits with storage case or individually.
Drawbar Clamping Force Gauges, Wired
Tool clamping force is often never measured after a machine is put into service. Regular verification allows problems to be detected early so maintenance and repairs can be scheduled. As a result, emergencies and unexpected downtime can be avoided. When troubleshooting, drawbar performance can quickly be verified.
HSK Tool Changer Alignment Gauges
Available for HSK-A 25, 32, 40, 50, 63, 80, 100, 125, and 160. Includes padded storage case.
Steep Taper Tool Changer Alignment Gauges
Available for Steep Taper 30, 40, 50, and 60. Includes padded storage case.
Capto Tool Changer Alignment Gauges
Available for Polygonal-Shank Taper (Capto) sizes C3, C4, C5, C6, C8, C8X, C10. Includes padded storage case.
KM Tool Changer Alignment Gauges
<p>Improper alignment can result in abnormal wear on the spindle interface, tool changer, and tool holder.</p> <p>In addition, mis-clamping and dropped tools can also occur.</p> <p>KM gauges are available for ISO 26622 as well as Mazak Integrex flanges.<br />Sets include taper and flange, axial and radial alignment pins, and a padded carrying case.</p>