Sorry, the page you are looking for doesn't exist.

If you are looking for an item or need support, please call us at 1-815-962-5600 or send us an email.

Return to TACRockford Home

Was any of this what you were looking for?

HSK Implementation
HSK Implementation

Cooperation between machine builder, tool holder manufacturer, and end-user assures process quality.

Details

Hydrostatic Leadscrews
Hydrostatic Leadscrews

- Speed comparable to a linear motor - Very low friction when machining, virtually frictionless during positioning - Steps in the 0.1 micron range are possible - No backlash when reversing direction

Details PDF (240.420)

HSK Grippers HSS and HSSL
HSK Grippers HSS and HSSL

The BERG Spanntechnik HSS gripper has been replaced by the HK and HKR. Replacement grippers are available for existing machines.

Details PDF (291-HSS)

SPH Pallet Clamping Heads
SPH Pallet Clamping Heads

BERG Spanntechnik series SPH clamping heads are primarily used for horizontal pallet clamping. The heads form the basis of a highly rigid, high precision repeatable workholding solution. In addition to clamping heads, non-active units are available for setup and storage stations. Heads are supplied as a matched set with 0.005mm accuracy.

Details PDF (292-SPH)

Drawbar Clamping Force Gauges, Wired
Drawbar Clamping Force Gauges, Wired

Tool clamping force is often never measured after a machine is put into service. Regular verification allows problems to be detected early so maintenance and repairs can be scheduled. As a result, emergencies and unexpected downtime can be avoided. When troubleshooting, drawbar performance can quickly be verified.

Details

Drawbar Stroke Verification Gauges
Drawbar Stroke Verification Gauges

Prevents gripper failures, spindle and tool holder taper damage, and "stuck" tool holders.

Details PDF (470.110)

Machine Tool Service Kits
Machine Tool Service Kits

Machine tool service kits from TAC Rockford include all common preventive gauges for a specific machine tool taper in one convenient kit. Kits are customized to a specific machine taper and include drawbar pullforce gauges, runout test arbors, tool changer alignment tool, spindle taper gauge¹ and accessories such as a spindle taper wiper. Contact us for gauges included Already have some of the gauges? We can customize a kit with only the additional items needed. Looking for a different combination of gauges? We can customize a kit to fit your specific requirements. ¹Taper gauge included with steep taper only, optional for HSK

Details

Runout Arbor Travel Cases
Runout Arbor Travel Cases

The runout arbor travel case is designed for portability while protecting arbors. The case holds two arbors, with additional space for extra retention knobs, indicator, and a magnetic base. The case is virtually indestructible and waterproof. Can be used with padlocks for added security.

Details PDF (465.001)

Immersion Liquid Re-Coolers
Immersion Liquid Re-Coolers

No additional space required thanks to the possibility of positioning the Immersion Re-Cooler onto the oil or liquid container. Large-surface evaporator made of standard steel or stainless steel 1.4301. Condenser extremely dirt-resistant. Owing to an approximately 5 times larger surface than the surface of the corresponding Continuous Cooling Plant, this equipment offers a high transmission value and efficiency even if the flow speed is low.

Details PDF (230.201)

Cooling Filtration Systems
Cooling Filtration Systems

Cooling Filtration Systems are designed for automatic purification cleaning and temperature equilibration of cooling lubricants. They are used in honing, grinding and glass grinding machines and in tempering and washing plants etc.

Details PDF (230.204)

Hydrocyclones
Hydrocyclones

Hydrocyclone Cooling Lubricant -- cleaning systems operate in all applications where heavy dirt particles are to be separated from low viscous liquids -- e.g. on machine tools (especially grinding machines), but also on machining stations, transfer lines and parts washing plants.

Details PDF (230.206)

Internal Bed Filters
Internal Bed Filters

This type of filter can be used in all treatments where small chips and fine particles are to be filtered out of liquids even if these are of a rather high viscosity. This type of filter has proved its worth and efficiency not only in machining stations, but also in grinding machines, honing machines and wash water conditioning. This filter can be used as an individual system, but also for supplying several machines simultaneously.

Details PDF (230.208)

Spring Combinations and Sets
Spring Combinations and Sets

Whenever a single compression, tension and helical disk spring alone does not meet the requirements, we individually design spring combinations and spring sets for our customers. By this means, we achieve significant successes regarding spring loads, operational safety, durability and installation length.

Details PDF (320.012)

Drawbar Clamping Measuring Bars
Drawbar Clamping Measuring Bars

This critical performance -- the tool clamping force -- is often never measured after a machine is put into service. Regular verification allows problems to be detected early so maintenance and repairs can be scheduled. As a result, emergencies and unexpected downtime can be avoided. When troubleshooting, drawbar performance can quickly be verified.

Details PDF (461.200.B)

Hydraulic Power Stations for Hydraulic Quick Die Clamping Systems
Hydraulic Power Stations for Hydraulic Quick Die Clamping Systems

Hydraulic power stations for quick die clamping systems are designed for actuating hydraulic clamping elements in the forming presses. A large number of electro-hydraulic (HA) or air-hydraulic power stations (HAL) are available depending on the use of the clamping elements and/or hydraulics on the press plunger or on the table, as well as the number of clamping elements.

Details PDF (293-HA)

BKW Replacement Parts Service
BKW Replacement Parts Service

European or Asian replacement part service for BKW. Whether for hard to get or find parts, saving time and money on overseas shipping, Transatlantic Connection handles the rest. We have purchased and/or quoted components from BKW in the past with arrangements to our customers.

Bosch-Service Replacement Parts Service
Bosch-Service Replacement Parts Service

European or Asian replacement part service for Bosch-Service. Whether for hard to get or find parts, saving time and money on overseas shipping, Transatlantic Connection handles the rest. We have purchased and/or quoted components from Bosch-Service in the past with arrangements to our customers.

Brinkmann Pumps Replacement Parts Service
Brinkmann Pumps Replacement Parts Service

European or Asian replacement part service for Brinkmann Pumps. Whether for hard to get or find parts, saving time and money on overseas shipping, Transatlantic Connection handles the rest. We have purchased and/or quoted components from Brinkmann Pumps in the past with arrangements to our customers.

Deniz Service LLC Replacement Parts Service
Deniz Service LLC Replacement Parts Service

European or Asian replacement part service for Deniz Service LLC. Whether for hard to get or find parts, saving time and money on overseas shipping, Transatlantic Connection handles the rest. We have purchased and/or quoted components from Deniz Service LLC in the past with arrangements to our customers.

Dräger Replacement Parts Service
Dräger Replacement Parts Service

European or Asian replacement part service for Dräger. Whether for hard to get or find parts, saving time and money on overseas shipping, Transatlantic Connection handles the rest. We have purchased and/or quoted components from Dräger in the past with arrangements to our customers.

EBM Replacement Parts Service
EBM Replacement Parts Service

European or Asian replacement part service for EBM. Whether for hard to get or find parts, saving time and money on overseas shipping, Transatlantic Connection handles the rest. We have purchased and/or quoted components from EBM in the past with arrangements to our customers.

Eitec Replacement Parts Service
Eitec Replacement Parts Service

European or Asian replacement part service for Eitec. Whether for hard to get or find parts, saving time and money on overseas shipping, Transatlantic Connection handles the rest. We have purchased and/or quoted components from Eitec in the past with arrangements to our customers.

Elesa-Ganter Replacement Parts Service
Elesa-Ganter Replacement Parts Service

European or Asian replacement part service for Elesa-Ganter. Whether for hard to get or find parts, saving time and money on overseas shipping, Transatlantic Connection handles the rest. We have purchased and/or quoted components from Elesa-Ganter in the past with arrangements to our customers.

FAG Replacement Parts Service
FAG Replacement Parts Service

European or Asian replacement part service for FAG. Whether for hard to get or find parts, saving time and money on overseas shipping, Transatlantic Connection handles the rest. We have purchased and/or quoted components from FAG in the past with arrangements to our customers.

Glual Replacement Parts Service
Glual Replacement Parts Service

European or Asian replacement part service for Glual. Whether for hard to get or find parts, saving time and money on overseas shipping, Transatlantic Connection handles the rest. We have purchased and/or quoted components from Glual in the past with arrangements to our customers.

Gühring Replacement Parts Service
Gühring Replacement Parts Service

European or Asian replacement part service for Gühring. Whether for hard to get or find parts, saving time and money on overseas shipping, Transatlantic Connection handles the rest. We have purchased and/or quoted components from Gühring in the past with arrangements to our customers.

Hasegawa Replacement Parts Service
Hasegawa Replacement Parts Service

In most cases, Transatlantic Connection, Inc. can supply new, original replacement parts from Hasegawa Machine Co. Ltd (CNC lathes/machining centers), Hasegawa-Surely Refrigeration Ltd. (industrial cooling units), and Hasegawa Iron Works Co. Ltd. (gear reducers) Please contact us with the nameplate information (manufacturer, part number, serial number, etc.) for the part you are looking for. We will check to see if the part is available, and provide a quotation to you. Transatlantic Connection’s Parts Service can help you get parts quickly and easily, without having to deal with overseas communication, payment, and shipping headaches. While we are not typically the official representative for a manufacturer, our global logistics network can quickly obtain virtually any "overseas" replacement part quickly and cost-effectively.

Hennig Replacement Parts Service
Hennig Replacement Parts Service

European or Asian replacement part service for Hennig. Whether for hard to get or find parts, saving time and money on overseas shipping, Transatlantic Connection handles the rest. We have purchased and/or quoted components from Hennig in the past with arrangements to our customers.

Hilti Replacement Parts Service
Hilti Replacement Parts Service

European or Asian replacement part service for Hilti. Whether for hard to get or find parts, saving time and money on overseas shipping, Transatlantic Connection handles the rest. We have purchased and/or quoted components from Hilti in the past with arrangements to our customers.

Hoerbiger Replacement Parts Service
Hoerbiger Replacement Parts Service

European or Asian replacement part service for Hoerbiger. Whether for hard to get or find parts, saving time and money on overseas shipping, Transatlantic Connection handles the rest. We have purchased and/or quoted components from Hoerbiger in the past with arrangements to our customers.

Page loaded in 0.2458 seconds.