619.590.100.160
HSK-A80 to 125 Tool Holder Blanks - HSK-A100
Product | Tool Holder |
Part Type | Blank |
Taper / Standard | HSK-A |
Taper Size | 100 |
D (mm) | 100 |
L (mm) | 160 |
f1 (mm) | 29 |
f2 (mm) | 45 |
d1 (mm) | 100 |
d9 (mm) | 88 |
Taper | L (mm) | D (mm) | f1 (mm) | f2 (mm) | d1 (mm) | d9 (mm) | Part Number | |
---|---|---|---|---|---|---|---|---|
HSK-A80 | 160 | 80 | 26 | 42 | 80 | 68 | 619.580.080.160 | |
HSK-A80 | 250 | 80 | 26 | 42 | 80 | 68 | 619.580.080.250 | |
HSK-A100 | 160 | 100 | 29 | 45 | 100 | 88 | 619.590.100.160 | |
HSK-A100 | 250 | 100 | 29 | 45 | 100 | 88 | 619.590.100.250 | |
HSK-A/T 100 | 160 | 120 | 29 | 45 | 100 | 88 | 619.590.120.160 | |
HSK-A100 | 250 | 127 | 29 | 45 | 100 | 88 | 619.590.127.250 | |
HSK-A125 | 160 | 125 | 29 | 45 | 125 | 111 | 619.592.125.160 | |
HSK-A125 | 305 | 125 | 29 | 45 | 125 | 111 | 619.592.125.305 |
For more information regarding this item (HSK-A80 to 125 Tool Holder Blanks - HSK-A100) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK-A80 to 125 Tool Holder Blanks
TAC Rockford stocks HSK-A32, HSK-A40, HSK-A50, HSK-A63, HSK-A80, HSK-A100, and HSK-A125 in a variety of diameters and lengths. HSK-A160 blanks are available on request as well.
HSK-A25 to 63 Tool Holder Blanks
TAC Rockford stocks HSK-A32, HSK-A40, HSK-A50, HSK-A63, HSK-A80, HSK-A100, and HSK-A125 in a variety of diameters and lengths. HSK-A160 blanks are available on request as well.
HSK-T Tool Holder Blanks
HSK-T63 tool holder blanks made to ICTM standard / ISO 12164-3 HSK-T blanks have tighter tolerances on the drive key slots, however they can in most cases also be used in HSK-A spindles.
HSK-F Tool Holder Blanks
TAC Rockford stocks HSK-F63 blanks. Other sizes are available on request.
HSK-C Tool Holder Blanks
- Contact us for other HSK sizes, diameters, lengths, and other special requirements. - Taper on standard blanks is finish hardened; blank portion not hardened. - DIN333 Form B center on blank end.
HSK-E Tool Holder Blanks
TAC Rockford stocks HSK-E32, HSK-E40, HSK-E50, and HSK-E63 blanks in a variety of diameters and lengths. Other sizes are available - contact us with your requirements.
PSC/PSK Tool Holder Blanks
- Contact us for other PSK sizes, diameters, lengths, and other special requirements. - Taper on standard blanks is finish hardened; blank portion not hardened.