355.611.040.000

HSK-A40 Manual Clamping Cartridge KS40-06

HSK-A40 Manual Clamping Cartridge KS40-06

Zoom Enlarge Image

HSK-A40 Manual Clamping Cartridge KS40-06

Available HSK-C 32, 40, 50, 63, 80, 100

Full Data Sheet (687.KS)

PDF Data Sheet: KS Clamping Cartridges (Standard) (687.KS)


HSK Taper Hex Key Size Tighten To Part Number
HSK-A/C 32       3 mm    6 Nm      355.611.032.000
HSK-A/C 40      3 mm    7 Nm      355.611.040.000
HSK-A/C 50       4 mm    15 Nm      355.611.050.000
HSK-A/C 63       5 mm    20 Nm      355.611.063.000
HSK-A/C 80       6 mm    30 Nm      355.611.080.000
HSK-A/C 100       8 mm    50 Nm      355.611.090.000

KS Assembly Spanners

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (HSK-A40 Manual Clamping Cartridge KS40-06) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

HSK-A Tool Holder Blanks
HSK-A Tool Holder Blanks

TAC Rockford stocks HSK-A32, HSK-A40, HSK-A50, HSK-A63, HSK-A80, HSK-A100, and HSK-A125 in a variety of diameters and lengths. HSK-A160 blanks are available on request as well.

KS Clamping Cartridges (Standard)
KS Clamping Cartridges (Standard)

Available HSK-C 32, 40, 50, 63, 80, 100

KS Clamping Cartridges for Minimal Lubrication (MLC)
KS Clamping Cartridges for Minimal Lubrication (MLC)

Available for HSK-C 40, 50, 63, 80, 100

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.

BERG Pallet Holding Force Gauges
BERG Pallet Holding Force Gauges

Includes measuring case, display unit, measuring cartridge, test certificate, and clamping head specific pull studs

Rear-Clamp Manual Clamping Cartridges
Rear-Clamp Manual Clamping Cartridges

355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.

KS Adapter Flanges
KS Adapter Flanges

Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100

TRIBOS SVP-2 Manual Pump Clamping Device
TRIBOS SVP-2 Manual Pump Clamping Device

Design with manual pump for quick actuation and frequent tool changes.

TRIBOS SVP-2 Assembly and Operating Manual
TRIBOS SVP-2 Assembly and Operating Manual

Design with manual pump for quick actuation and frequent tool changes.

KS Adapter Flanges for Short Spindles
KS Adapter Flanges for Short Spindles

With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.

Page loaded in 0.1645 seconds.