320.010

Roehrs Multi-Wire Springs

Multi-wire springs are made of wire strands with various strand structures and are put to use as compression, torsion, tension and form springs.

PDF Data Sheet: Roehrs Multi-Wire Springs (320.010)

Multi-wire springs are made of wire strands with various strand structures and are put to use as compression, torsion, tension and form springs.

From a technical point of view, Roehrs multi-wire springs are highly sophisticated products and are used in case single-wire springs made of round, flat or square wire could fail due to highly dynamic frequencies and high-impulse stresses or could not guarantee the operational safety. Due to the strand structure, multi-wire springs display increased spring loads and reduced torsion stresses at high deflections compared to single-wire springs.

The tensile stresses in the cross-section of the wire significantly counteract the torsion stresses which would normally destroy the spring and lead to an increased damping effect.

The essential advantages at a glance: • Absorption of high impact velocities and peak loads
• Absorption of high dynamic frequencies
• Excellent damping features
• Optimization of damping and gliding features as well as durability by means of thermoplastic coating
• Optimum utilization of material in the cross section of the wire strand by converting torsion into tensile stresses
• High operational safety, as the spring force is virtually unaffected by breakages within the strand
• High deflections possible, even given small outer diameters
• Flat spring characteristic, increasing progressively when close to solid length


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Roehrs Multi-Wire Springs) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Tension and Torsion Springs
Tension and Torsion Springs

We are able to offer our customers tension, torsion and individual form springs made of round, square or flat wire as well as of strip steel for all kinds of applications.

Surge Dampers
Surge Dampers

- Multi-wire spring element with very high damping behavior, even at high variations in temperature - Different spring designs to meet customer requirements - Resistant to oil, grease, solvents etc. - High operational safety due to high energy absorption

Round Wire Compression Springs
Round Wire Compression Springs

Round wire compression springs are used in countless applications and fulfill / meet the widest range of technical requirements. We calculate the ideal spring design and select the appropriate spring material according to the load and environmental conditions. We can guarantee our customers the highest quality of our products.

Flat Wire Compression Springs
Flat Wire Compression Springs

Compression springs made from flat wire - wound to the spring axis - offer the advantage of higher energy absorption at the same installation space compared to round wire compression springs. Furthermore, flat wire compression springs are more resistant to buckling and will encounter no friction martensite at high frequencies -- unlike round wire compression springs, where the life expectancy is reduced. Our in-house rolling mills allow us to roll and process high-quality spring steels to the specific wire profiles our customers need. By choosing the right wire profile and spring dimensions, both linear and progressive characteristics can be realized.

Special Multi-Characteristic Springs
Special Multi-Characteristic Springs

Röhrs special springs with two characteristics are a specialty, in which two spring characteristics are combined into one spring.

Helical Disk Springs
Helical Disk Springs

With our patented helical disk spring, Roehrs can offer our customers a proven and tested machine component, which in many cases replaces the common multi-layer disc spring assembly.

Square Springs
Square Springs

We are your specialists in the manufacturing of square springs for industrial use. Our standard springs are made of 1.4310 material with a wire thickness of 1.0 mm. Other materials and thickness values are available at request.

Spring Combinations and Sets
Spring Combinations and Sets

Whenever a single compression, tension and helical disk spring alone does not meet the requirements, we individually design spring combinations and spring sets for our customers. By this means, we achieve significant successes regarding spring loads, operational safety, durability and installation length.

Page loaded in 0.1093 seconds.