Gutekunst Springs

Gutekunst Federn logo

The production lines cover the manufacture of different types of spring made from all common spring steels in small quantities or large batches.

Compression Springs Overview
Compression Springs Overview

Steel springs from Gutekunst are manufactured using spring steel wire material no.1.4310 in compliance with EN 10270 part 3 (AISI 302 / BS 301S21). The tolerances of the wire diameters comply with DIN 2076.

Details PDF (319.000)

Spring Clips
Spring Clips

Spring clips with a C in the front are made of CK 75 G without a galvanized surface plating. Upon request, we can offer galvanic surface. The spring clips with an X in the front are made of 1.4310 (stainless steel).

Details PDF (320.001)

Leaf Springs
Leaf Springs

We use the following materials in any variant in manufacturing for our clients: 1.4310, 1.4301, CK 75 G, CK 75 H, CK 85, CK 101, CuSn6, CuZn37, CuBe2 Plus any other special material you may supply. We offer the following range of dimensions: strip thickness values of 0.1 to 3.0 mm, strip widths of 2.0 to 120 mm.

Details PDF (320.002)

Bent Wire Parts
Bent Wire Parts

We use the following materials in any variant in manufacturing wire bent parts for our clients: 1.4310, 1.4301, 1.1200, plus any special material you may request or supply. We offer the following range of dimensions: wire thickness values of 0.2 to 4.0 mm.

Details PDF (320.003)

Square Springs
Square Springs

We are your specialists in the manufacturing of square springs for industrial use. Our standard springs are made of 1.4310 material with a wire thickness of 1.0 mm. Other materials and thickness values are available at request.

Details PDF (320.004)

Laser-cut Blanks
Laser-cut Blanks

We manufacture laser-cut blanks in any variant with strip thickness values of 0.2 to 3.0 mm with our modern TRUMPF laser cutting system. The maximum widths can range up to 300 mm (materials 1.4310 and CK 75) or 1250 mm (material 1.4301). Of course, other materials are also available at request.

Details PDF (320.005)

Spring Band Steel
Spring Band Steel

We supply spring band steel either as pre-cut blanks or in coils with thickness values of 0.1 to 3.0 mm and widths of 2.0 - 120 mm. Available materials: 1.4310, 1.4301, C 75 S, C 100 S, CuSn6, CuZn37 as well as CuBe2

Details PDF (320.006)

Page loaded in 0.1081 seconds.