292-NSM-HV

BERG NSM-HV Zero Point Clamping System

BERG NSM-HV Zero Point Clamping System (Click image to enlarge)
BERG NSM-HV Zero Point Clamping System (Click image to enlarge)

NSM-HV series zero point clamping heads are used for workholding pallet clamping as well as other applications on machine tools. With the clamping heads and matching retention bolts, extremely tight tolerance clamping position repeat precision can be achieved.

PDF Data Sheet: BERG NSM-HV Zero Point Clamping System (292-NSM-HV)

Application NSM-HV series zero point clamping heads are used for workholding pallet clamping as well as other applications on machine tools. With the clamping heads and matching retention bolts, maximum clamping position repeat precision can be achieved. Using NSM versions with blowing-off mechanisms and lock/lift-out stroke, the clamping head can even be used during "lights-out" production. Due to the mechanical clamping principle with integrated force intensification and locking feature, the clamping head is also suitable for pallets, clamping towers, swivel tables and vertical applications. The clamping head can be installed as double, quadruple or customer specific multiple unit applications.

The shape and positional accuracy of the centering cones and horizontal support surfaces guarantees maximum repeat precision during device and pallet change. The central protective cover and blow-off of contact surfaces surfaces (cover as well as the cone) means the clamping system is insensitive to chips and other debris. The clamping bolt is drawn into the clamping head by a spring actuated collet. During this process, the spring force is intensified by an integrated mechanism. The integrated hydraulic piston unclamps the locking device and releases/ejects the pull stud.

Modified versions, e.g. with integrated media transfer are available upon request.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (BERG NSM-HV Zero Point Clamping System) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

NAB Pull Studs
NAB Pull Studs

Pull studs are the interface between devices, pallets and the clamping systems of the machine tool. For applications with two, four or more clamping heads, solid bolts are used for center position, sword bolts are used to determine the angled position and retaining bolts are exclusively used for vertical positioning. Versions are available for both front and rear installation. Parallel to the applications of the BERG clamping heads with support cone, screw-in bolts are available as solid bolts and retaining bolts with screw thread. These are used for very high drawing-in forces and maximum stability in a minimum amount of space.

NSM-PV Zero Point Clamping System
NSM-PV Zero Point Clamping System

NSM PV zero point clamping heads are used for fixture and pallet clamping on machine tools. With the clamping heads and the associated clamping bolts provide for the highest levels of clamping position repeatability. Due to the mechanical integrated booster and lock, the clamping head is also suitable for pallets, tombstones, pivot tables and vertical applications. The chuck can be configured as double, 4-fold and custom multi-application.

SPH Pallet Clamping Heads
SPH Pallet Clamping Heads

BERG Spanntechnik series SPH clamping heads are primarily used for horizontal pallet clamping. The heads form the basis of a highly rigid, high precision repeatable workholding solution. In addition to clamping heads, non-active units are available for setup and storage stations. Heads are supplied as a matched set with 0.005mm accuracy.

SPH-V Pallet Clamping Heads
SPH-V Pallet Clamping Heads

Clamping heads of the series SPH-V are principally used in machining centers for vertical pallet clamping. The series SPH-V is based on the basic principle of the SPH. The additional internal self-locking system retains the clamping force even when hydraulic pressure is not present. It is possible to machine workpieces on a vertical pallet after clamping without a hydraulic connection - without any reduction in safety!

SPM-HV Pallet Clamping Heads
SPM-HV Pallet Clamping Heads

SPM-HV series pallet clamping heads are used for pallet clamping on single or double axis indexing tables. With the clamping heads and matching tapered rings, maximum workpiece position repeatability and precision is possible.

Hydrodock System
Hydrodock System

Hydrodock units form the basis of a very compact and flexible clamping system. They were originally conceptualized as for head change systems on large machining centers, but also find applications in diverse areas such as injection molding machines.

Pallet Holding Force Gauges
Pallet Holding Force Gauges

Clamping force measuring gauges for pallets are intended to quickly measure the holding force of individual clamping heads. Pallet clamping adapters are per-application based, and are fitted according to the specifications of the customer's pallet system. Clamping adapters can be or have been provided for various pallet systems: BERG, Rohm, Mazak, OTT, Schunk, Erowa, and others.

Page loaded in 0.1432 seconds.