230.200

BKW Continuous Re-Cooling Power Units

The Re-Cooling Plant is easy to open for cleaning in applications where contaminated materials are processed. The lateral air aspiration device for the condenser is positioned at the top, which makes the dirt accumulations inside the condenser easy to see and, thus, easy to clean. Upon request, it is available with an air filter fitted to the condenser.

PDF Data Sheet: BKW Continuous Re-Cooling Power Units (230.200)

Re-Cooling Plant ready for connection, including an incorporated electronic control for refrigeration compressor, condensing ventilator, feed pump etc.

The Re-Cooling Plant is easy to open for cleaning in applications where contaminated materials are processed. The lateral air aspiration device for the condenser is positioned at the top, which makes the dirt accumulations inside the condenser easy to see and, thus, easy to clean. Upon request, it is available with an air filter fitted to the condenser.

Available as a serial standard product with 1 or 2 axial fans.

Radial fan for the channel connection from DL 350. Solid, aesthetic housing made of standard steel sheet profiles, including an operator panel placed at a lower level to protect the control instruments. Large control box to incorporate all control instruments of the IP 54 enclosure, including extra space for additional equipment.

As the control panel, the switch box and the condenser are all installed on one side, the equipment can be installed even where space is limited. Extra space is also provided beneath the condenser part, for incorporation of compensating containers, feed pumps and safety devices.

Available with up to 3 refrigerating circuits with a single refrigeration condenser and an independent control system for each refrigerating circuit. Upon request a differential control system, relative to room temperature with differences from 0.2 K or a three-point control system for heating / cooling, can be supplied. Easy fitting of the thermostat sensors at the inlet and outlet of the Re-Cooling Plant. Extremely compact external dimensions thanks to a sensible utilization of the room available. All power units are also available with a water-cooled condenser and a heat recovery system.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (BKW Continuous Re-Cooling Power Units) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Power Clamp Unshrinking Devices
Power Clamp Unshrinking Devices

Unshrinking device for broken tools.

Immersion Liquid Re-Coolers
Immersion Liquid Re-Coolers

No additional space required thanks to the possibility of positioning the Immersion Re-Cooler onto the oil or liquid container. Large-surface evaporator made of standard steel or stainless steel 1.4301. Condenser extremely dirt-resistant. Owing to an approximately 5 times larger surface than the surface of the corresponding Continuous Cooling Plant, this equipment offers a high transmission value and efficiency even if the flow speed is low.

Cooling Filtration Systems
Cooling Filtration Systems

Cooling Filtration Systems are designed for automatic purification cleaning and temperature equilibration of cooling lubricants. They are used in honing, grinding and glass grinding machines and in tempering and washing plants etc.

Heat Exchangers
Heat Exchangers

These cooling systems facilitate the cooling of oils and other media (with BKW equipment even contaminated media). Water is supplied at the front inlet side from the internal side of the tubes while the medium to be cooled flows in from the jacket.

Mini Water Cooler
Mini Water Cooler

The BKW Mini Water Color can be used for many diverse applications. Some examples include welding machinery, Laser-Plasma installations, electron microscopes, X-ray tubes, hydraulic systems, plastic molding machinery, spindles, motors, cleaning and degreasing installations, as well as numerous other applications.

Power Clamp Power Coolers
Power Clamp Power Coolers

The Power Cooler is a new cooling unit to cool down tool holders. An air stream interspersed with a fine water mist cools down the shrink fit chucks of any shape in record time.

Power Clamp Premium Plus Heat Shrink Systems
Power Clamp Premium Plus Heat Shrink Systems

The Power Clamp Premium/Premium Plus is the shrink fit machine for perfectionists. The cooling bodies are fixed at linear guides. For the cooling process they are exactly centered put on the hot shrink fit chuck. The cool down phase is terminated temperature controlled automatically.

Power Clamp Premium Heat Shrink Systems
Power Clamp Premium Heat Shrink Systems

The Power Clamp Premium/Premium Plus is the shrink fit machine for perfectionists. The cooling bodies are fixed at linear guides. For the cooling process they are exactly centered put on the hot shrink fit chuck. The cool down phase is terminated temperature controlled automatically.

Control Cabinet Coolers
Control Cabinet Coolers

Electronic control systems are prone to malfunctions if exposed to high temperatures. The cooling is often performed by the blowing-in of external air or via indirect air/air heat exchangers without filters. As these systems always work according to the actual air temperature, the cooling performance is often unsatisfactory, especially during the hot season. The Control Cabinet Cooler has been constructed on the basis of 20 years of experience in refrigeration technology and tens of thousands of industrial cooling plants built for all kinds of applications. The cooling equipment is a unit ready for instant connection, and just an opening needs to be provided in the control cabinet for its installation. The equipment designed according to 19" technology is conceived as ready-to-install units for the standard control cabinets.

Page loaded in 0.0812 seconds.