495.205

ForceCheck Wireless Chuck Force Gauges

D72 Wireless Chuck Force Gauge (Click image to enlarge)
D72 Wireless Chuck Force Gauge with Display (Click image to enlarge)
Chuck gripping 72 mm diameter sensor (Click image to enlarge)
Wireless chuck force sensor in use with magnetic wand (Click image to enlarge)
ForceCheck Wireless Chuck Force Gauges (Click image to enlarge)
ForceCheck Wireless Chuck Force Gauges (Click image to enlarge)

D72 Wireless Chuck Force Gauge

Zoom Enlarge Image

D72 Wireless Chuck Force Gauge

The ForceCheck wireless chuck force gauge is designed to quickly and accurately measure holding force and speed on chucks. Verifying chuck holding force allows manufacturers to improve the repeatability of a manufacturing process by checking actual holding force under dynamic (rotating) conditions, as well as perform critical preventative maintenance checks. Contact us for other clamping diameters and extension rings, as well as 4+ jaw chucks.

Item Jaws Diameter Force Range (per Jaw) Part Number
D28   2 / 3  28 mm / 1.10 in.  0...15kN / 3,400 lb-F          495.205.028.003
D72   2 / 3  72 mm / 2.83 in.  0...50kN / 11,200 lb-F          495.205.072.003
D125   2 / 3 / 4  125 mm / 4.92 in.  0...65kN / 14,600 lb-F          495.205.125.004
D200   2 / 3 / 4 / 6  200 mm / 7.87 in.  0...100kN / 22,500 lb-F          495.205.200.006
D28 (Low Force)   2 / 3  28 mm / 1.10 in.  Contact us          495.205.028.003.LF
D72 (Low Force)   2 / 3  72 mm / 2.83 in.  Contact us          495.205.072.003.LF
D125 (Low Force)   2 / 3 / 4  125 mm / 4.92 in.  Contact us          495.205.125.004.LF
D200 (Low Force)   2 / 3 / 4 / 6  200 mm / 7.87 in.  Contact us          495.205.200.006.LF

ForceCheck Drawbar Force Gauge Base Set, Wireless
ForceCheck Drawbar Force Gauge Base Set, Wireless

Sets include wireless display and carrying case. Measuring bars, adapters, and other accessories are ordered separately.

Details

Part Number
ForceCheck Wireless Base Set                 461.320.000.000

Chuck Force Sensor Extensions and Accessories
Chuck Force Sensor Extensions and Accessories

Accessories for the chuck force include a variety of types of rest pads and extensions to match the gripping jaws on a turning-center/chuck.

Details PDF (495.800)


The ForceCheck wireless chuck force gauge is designed to quickly and accurately measure holding force and speed on chucks. Verifying chuck holding force allows manufacturers to improve the repeatability of a manufacturing process by checking actual holding force under dynamic (rotating) conditions, as well as perform critical preventative maintenance checks.

Complete setsIncludes sensor, standard rest pads, RPM magnetic wand, display, and padded carrying case.

SpecificationsTwo standard sizes are available:
• Diameter 72mm, for measuring 2 and 3 jaw chucks
• Diameter 125mm, for measuring 2, 3, and 4 jaw chucks.
• Custom sensors are available for any size chuck. Contact us for more information.

For soft jaws, customized radiused extension kits are available to fit specific diameters. Stop rings are available for controlling insertion depth.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (ForceCheck Wireless Chuck Force Gauges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Chuck Force Gauges - Wired
Chuck Force Gauges - Wired

Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.

Wireless Chuck Force Sensor Manual
Wireless Chuck Force Sensor Manual

The ForceCheck chuck force gauge is designed to measure the clamping forces created by a chuck. The wireless sensor can be used for either static (non-rotating) or dynamic (rotating) measurements. When rotating, the sensor can also measure RPM (Revolutions Per Minute).

HSK Taper ForceCheck Wireless Drawbar Force Sensors
HSK Taper ForceCheck Wireless Drawbar Force Sensors

The ForceCheck wireless drawbar force gauge is based on the same technology as the industry-leading ForceCheck gauge. With the added convenience of wireless operation, larger machines and hard-to-reach spindles are easier to check. In addition, the unit offers the optional capability of data logging on a USB stick.

Large Diameter VTL Chuck Force Gauges
Large Diameter VTL Chuck Force Gauges

Measure clamping force on 12+ inch diameter chucks. Available as wired or wireless sensor unit. Base set is separate which includes wired or wireless read-out display, custom case, and accessories for the sensor.

HSK Taper Wireless Force Measuring Bars
HSK Taper Wireless Force Measuring Bars

Wireless measuring adapters have the option of coming with or without the tool change groove. Wireless adapters can be retrofitted for quick inspection or designed for integrated use; ask us more for details.

Wireless Drawbar Force Gauges
Wireless Drawbar Force Gauges

The ForceCheck wireless drawbar force gauge is based on the same technology as the industry-leading ForceCheck gauge. With the added convenience of wireless operation, larger machines and hard-to-reach spindles are easier to check. In addition, the unit offers the optional capability of data logging on a USB stick.

Wireless Gauge Display Manual
Wireless Gauge Display Manual

The ForceCheck Wireless Display is designed for use in conjunction with ForceCheck wireless sensors. The display shows the force, RPM, or other output transmitted by a connected sensor.

Wireless Chuck Force Sensor Sets
Wireless Chuck Force Sensor Sets

Suitable for measuring RPM and force at the same time. These are complete sets that include sensor, standard rest pads, RPM magnetic wand, display, and padded carrying case. Contact us for custom sizes and multi-adapter sets.

Machine-Integrated Drawbar Force Gauges
Machine-Integrated Drawbar Force Gauges

The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically check the drawbar without stopping production. Drawbar force is returned to the machine control via a wireless receiver, automatically alerting the operator if insufficient force is detected.

Page loaded in 0.15 seconds.