430.124.935.000
Tool Holder Taper Inspection Gauge - Tool Holder Taper Inspection Gauge 35
Detect tool holder taper wear in seconds
Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60)
The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish.
Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose.
The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.
| Product | Gauge |
| Part Number | ||||||||
|---|---|---|---|---|---|---|---|---|
| Tool Holder Taper Inspection Gauge 30 | 430.124.930.000 | |||||||
| Tool Holder Taper Inspection Gauge 35 | 430.124.935.000 | |||||||
| Tool Holder Taper Inspection Gauge 40 | 430.124.940.000 | |||||||
| Tool Holder Taper Inspection Gauge 50 | 430.124.950.000 | |||||||
| Tool Holder Taper Inspection Gauge 20 | 430.124.A20.000 |
For more information regarding this item (Tool Holder Taper Inspection Gauge - Tool Holder Taper Inspection Gauge 35) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Steep Taper Spindle Plug Gauges
TAC Rockford gauges are used for inspection of steep taper spindle tapers per CAT, ISO, JIS, DIN, etc. Available for Steep Taper 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65
Tool Holder Taper Sleeve Gauges
Available for Steep Taper CAT/ANSI/DIN/BT/ISO 10, 15, 20, 25, 30, 35 40, 45, 50, 55, 60, 65
Submit your feedback