293-PSP-HW

BERG Stationary Hydraulic Self-locking Swing-out Style Clamping Systems

Quick die changing system with self-locking swing-out style clamping

Hydraulic, self-locking stationary swing-out style clamp for die clamping on slides and blackholders. When unclamping the draw bar swings out up to 15 degrees max.

PDF Data Sheet: BERG Stationary Hydraulic Self-locking Swing-out Style Clamping Systems (293-PSP-HW)

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (BERG Stationary Hydraulic Self-locking Swing-out Style Clamping Systems) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Stationary Electromechanical Swing-out Style Clamping Systems
Stationary Electromechanical Swing-out Style Clamping Systems

Electromechanical swing-out style clamp for die clamping on slides and blank-holders. When unclamping the draw-bar swings out up to 15 degrees maximum.

Stationary Hydraulic Pull-back Rotational Style Clamping Systems
Stationary Hydraulic Pull-back Rotational Style Clamping Systems

The hydraulic die clamping system with pull-back rotational style clamping is designed to clamp tools automatically at the press slide or on the table.

Stationary Hydraulic Wedgebar Style Clamping Systems
Stationary Hydraulic Wedgebar Style Clamping Systems

The hydromechanical wedge bar style clamping system is designed for clamping moving bolsters. The clamping slide generating the clamping force moves back into the housing after release.

Stationary Clamping Systems
Stationary Clamping Systems

The hydraulic die clamping system, PSP...HB, is designed to automatically clamp tools at the press slide or on the table. In the "Unclamped" position, the tensioning rod is completely retracted into the clamping element and initially moved out of the clamping element when pressure is applied.

Manually Operated Swing-out Style Transfer Rail Couplings
Manually Operated Swing-out Style Transfer Rail Couplings

The mechanical self-locking swing-out style gripper rail coupling is designed for manual coupling of gripper rails on transfer presses. A short lift-out stroke is required for changing the tool. An axial stroke is required in the event of additional centering with pins. The coupling consists of a hard anodized aluminum housing, a swiveling tensioning rod and a self-locking eccentric cam gearing. This configuration allows high clamping forces and features a high dynamic rigidity with minimum mass.

Automatic Hydro-mechanical Self-locking Drawbar Style Clamping Systems
Automatic Hydro-mechanical Self-locking Drawbar Style Clamping Systems

The drawbar style hydromechanical (hydrolock) self-locking die clamping system is designed for clamping dies of various widths on press slides. The clamping actuator moves automatically in the T-slot of the press slide between the parking position and the respective die. Clamping and unclamping are performed by a hydromechanical self-locking clamping gear. Hydraulic pressure is at a maximum 90 bar.

Stationary Electromechanical Rotational Style Clamping Systems
Stationary Electromechanical Rotational Style Clamping Systems

Electromechanical rotational-style clamp for die clamping on slides and blank-holders. When unclamping, the draw bar rotates 90 degrees.

Stationary Electromechanical Moving Bolster Clamp Wedgebar Style Clamping Systems
Stationary Electromechanical Moving Bolster Clamp Wedgebar Style Clamping Systems

Electromechanical wedgebar style clamp for clamping moving bolsters. When unclamping, the clamping wedge withdraws into the clamp body.

Stationary Electromechanical Gripper Style Clamping Systems
Stationary Electromechanical Gripper Style Clamping Systems

Electromechanical gripper style clamp for die clamping on sides. When unclamping the collet opens in order to disengage the draw bolt of the die.

Page loaded in 0.1102 seconds.