Tel. 815-962-5600
Fax 815-962-4600
Mon-Fri 7am-5pm CST
Tel. 815-962-5600
Fax 815-962-4600
Mon-Fri 7am-5pm CST
Click on image to enlarge
Download PDF: Series 978 HSK 30 Degree Clamping Angle Gauges (410.231)
Description
To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface.
• Calibration on request
• Includes calibrated setting gauge and measuring instructions
• Supplied in wooden case with inspection protocol
Parts
| Taper | d1 | l1 | Order Number | |||||
|---|---|---|---|---|---|---|---|---|
| HSK 25 | 15 | 7.21 | 410.231.125.000 | |||||
| HSK 32 | 19 | 8.92 | 410.231.132.000 | |||||
| HSK 40 | 23 | 11.42 | 410.231.140.000 | |||||
| HSK 50 | 29 | 14.13 | 410.231.150.000 | |||||
| HSK 63 | 37 | 18.13 | 410.231.163.000 | |||||
| HSK 80 | 46 | 22.85 | 410.231.180.000 | |||||
| HSK 100 | 58 | 28.56 | 410.231.190.000 |
Contact Us About This Item
Tool Racks Model M8S
To accommodate 8 tool carriers in two rows (4 tool carriers per row), arranged at a 35 degree angle.
Details
PDF (580.131.005)
HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed...
Details
PDF (410.230)
Tool Racks Model 8
To accommodate 8 tool carriers in two rows (4 tool carriers per row), arranged at a 35 degree angle. Used as a table model or as a standing model with an underframe.
Details
PDF (580.131.011)
BERG Steep Taper Grippers SSK
BERG Spanntechnik SSK series grippers are known worldwide for trouble-free operation. Available for CAT/ANSI, DIN, MAS/BT/JIS, and ISO.
SSKS grippers are dimensionally...
Details
PDF (291-SSK)
BERG SPH-V Pallet Clamping Heads
Clamping heads of the series SPH-V are principally used in machining centers for vertical pallet clamping. The series SPH-V is based on the basic principle of the SPH. The...
Details
PDF (292-SPH-V)
BERG Pallet Clamping Force Gauges
Includes measuring case, display unit, measuring cartridge, test certificate, and clamping head specific pull studs
Details
PDF (292-PCFG)
Drive Key Spindle Gauges
When inserted in the spindle, the "go" gauge should be in contact with the plane face. The "no go" gauge should not contact the face. Two measuring gauges in storage case:...
Details
PDF (410.330)
BERG SPM-HV Pallet Clamping Heads
Clamping heads of the SPM-HV series are used for pallet clamping on single or double axis indexing tables. With the clamping heads and attendant tapered rings, maximum repeat...
Details
PDF (292-SPM-HV)
Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown...
Details
PDF (410.210)
Print Data Sheet
