Haimer Power Clamp Power Coolers

Share |

Click on image to enlarge

Download PDF: Haimer Power Clamp Power Coolers (560.215)

Description

The Power Cooler is a new cooling unit to cool down tool holders. An air stream interspersed with a fine water mist cools down the shrink fit chucks of any shape in record time.

• Contour-independent cooling, therefore universal applicable for all sizes and diameters of shrink fit chucks
• Cools thick-walled tool holders far faster than common cooling systems
• A closed circuit with return of water and steam enables usage in clean areas such as the tool management or tool assembly
• Is intended to be docked to the Power Clamp Premium machines

Show/Hide Contact Us About This Item

Haimer Power Clamp Preset Network Heat Shrink Systems
The Power Clamp Preset Network is based on the time-tested Power Clamp Preset. It is equipped with a PC that acts as the interface to your tool management and controls the...

Details PDF (560.202)

Haimer Power Clamp Nano Heat Shrink Systems
The all new Power Clamp Nano is your entry into the world of micro machining.
The new shrink fit machine was specifically developed for small interfaces, i.e. HSK 25,...

Details PDF (560.212)

Haimer Power Clamp Mini Heat Shrink Systems
Simple shrink fit machine for small tools.
- Power: approx. 3 kW
- Mains voltage: 230 V, 50-60 Hz
- Tools: only solid carbide from � 3-16 mm
-...

Details PDF (560.214)

Haimer Power Clamp Premium Plus Heat Shrink Systems
The Power Clamp Premium/Premium Plus is the shrink fit machine for perfectionists. The cooling bodies are fixed at linear guides. For the cooling process they are exactly...

Details PDF (560.200)

Haimer Power Clamp Premium Heat Shrink Systems
The Power Clamp Premium/Premium Plus is the shrink fit machine for perfectionists. The cooling bodies are fixed at linear guides. For the cooling process they are exactly...

Details PDF (560.201)

Haimer Power Clamp Shower Coolers
For rapid cooling of tools. Add-on for all shrink fit machines.
- Suitable for all contours
- Drying by rotating air nozzles
- Supplementing existing...

Details PDF (560.216)

Haimer Power Clamp Basic Heat Shrink Systems
Standard shrink fit device for all tools (solid carbide and HSS).
- Power: approx. 10 kW
- Mains voltage: 3x360-500 V, 16 A
- Tools: solid carbide and...

Details PDF (560.213)

Haimer Power Clamp Economic NG Heat Shrink Systems
High performance shrink fit machine for all tools.
- With intelligent NG coil
- Single chuck version
- Without cooling

Details PDF (560.209)

Haimer Power Clamp Economic Heat Shrink Systems
High performance shrink fit machine for all tools.
- With standard coil
- Single chuck version
- Without cooling

Details PDF (560.210)