HSK-A Great Power Collet Chucks

For tools with Plain cylindrical straight shank. Balanced according to ISO 1940-1 up to 10,000 rpm. Available for HSK-A 63, 80, 100.

HSK-E Collet Chucks ER Type (DIN 6499)

For tools with cylindrical shank DIN 1835-A. Balanced according to ISO 1940-1 up to 10,000 rpm. Available for HSK-E 25, 32, 40, 50, 63.

HSK-F Collet Chucks ER Type (DIN 6499)

For tools with cylindrical straight shank DIN 1835-A. Balanced according to ISO 1940-1 up to 10,000 rpm. Available for HSK-F 63.

HSK-C Collet Chucks ER Type (DIN 6499)

For tools with cylindrical straight shank DIN 1835-A. Balanced according to ISO 1940-1 up to 10,000 rpm. Available for HSK-C 32, 40, 50, 63.

HSK-A Collet Chucks ER Type (DIN 6499)

For tools with cylindrical straight shank DIN 1835-A. Balanced according to ISO 1940-1 up to 10,000 rpm. Available for HSK-A 32, 40, 50, 63, 80, 100.

KS Adapter Flanges

Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100

KS Adapter Flanges for Short Spindles

With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.

Series 978 HSK 30 Degree Clamping Angle Gauges

To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface.

KS Adapter Flanges with Radial Alignment

Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.

HSK and Standard Taper Comparison