Danray Lathe Chuck Shields

These heavy-duty lathe chuck shields are designed to apply to lathes or other similar machine applications. The shield provides a barrier between the chuck and workpiece and the operator. The shield also deflects chips, coolant, and other particles. The shield hinges up to the left and out of the way for changing the chuck, using the chuck key, and changing the workpiece. The operator does not need to reach over the chuck to move the shield in and out of position (which is a possible safety hazard), and the shield will not interfere with lathes that have a rear guard/backsplash.

Lathe Chuck Shield Images

Lathe Chuck Shields Ordering Information

SHD-119L: Lathe Chuck Shield for 6" Chucks and Smaller

SHD-1812L: Lathe Chuck Shield for 12" Chucks and Smaller

SHD-2312L: Lathe Chuck Shield With Back Angle for 12" Chucks and Smaller

SHD-2914L: Lathe Chuck Shield With Back Angle for 18" Chucks and Smaller

SHD-4016L: Lathe Chuck Shield With Back Angle for 24" Chucks and Smaller

BKT-180: 1/4"-Thick Bracket Extension Assembly With Fasteners